Developing a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen that allows for a write-to-write experience, even while you are abroad. This is because of the unique Juul Compatible Pods design of the pen. It has two tanks, one smaller compared to the other, that house the e juice and charged batteries. When the user really wants to write, he just places the pen in to the smaller tank and places the ink in the chamber where it will be vaporized. He simply turns on the pen and writes as if he is writing under a black mirror.
One of the greatest attributes of the Smok Pen is its capability to charge while it is on your own desk. This is due to the coils on the Smok Pen are designed in a way to keep the e juice from dripping onto the table or somewhere else. This is due to the 0.3-ohm coil that’s placed inside the Smok Pen. The 0.3-ohm coil ensures that even the slightest of air currents will not affect the writing process. This is due to the electronic circuitry has protection built in so that it will never be affected by extremely low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that is included with it. Since the electronic circuitry includes a safety barrier built in, which means that there is no risk involved when charging these devices through the computer. The Smok Pen has a charging capacity of sixteen 50 mah batteries, which is ideal for all pens that use a couple of batteries.
To keep the Smok Pen doing work for an extended time period it is important you don’t overcharge the battery. Overcharging the battery will reduce the voltage that’s available and may eventually bring about the device malfunctioning. Overcharging the Smok Pen may also affect the vaporizing process. In the event that you feel that your battery isn’t getting the vapor it should, remove the pen from the power source and let it cool off for a few minutes.
The fire button on the Smok Pen is situated at the bottom right corner of the device. The fire button has an orange light, which indicates that it is on. It is possible to press this button to activate the electronic heating element that may let you vaporize the oil. When you have done so you can remove the coil from the holder and place it into the holder and place the Smok Pen into the airflow chamber, which will cause the heating element to start heating up and burning off the wick.
When the coil is removed from the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are put inside the holder plus they get heated from the airflow. After they get hot they begin to turn blue, which is the indication that it’s ready for the pen’s battery. Make sure that you place your sub-ohm into the chamber before you push the fire button. If you do not put the coil in to the airflow chamber then the oil will leak and cause the leaking of e-juice.
Before you put the battery in to the pen, you must make sure that you have disconnected all of the leads. Then you have to remove the Smok Pen’s cap and locate the leak or drip tip. You need to clean this with a little cotton bud, so as to eliminate the leak. Then reattach the cap back again to the Smok Pen and you also are ready to place the battery in to the pen.
The final section of the construction process may be the adapter plate, which fits in to the Smok Vaporizer’s USB port. This plate lets you charge your e-juice during your computer, so long as you have an adapter for USB connection. I really like this part since it allows me to charge my entire kit at once without worrying about running out of power or constantly running out of e-juice.